Topic: skinmeshhelper error on compile (Read 26002 times)

binary1 · « **on:** May 17, 2012, 04:07:03 PM »

I'm trying to compile Wintermute with Visual C++ 2008 express edition. I have directx 8 so I got past the d3dx8 errors but now am getting the following errors:

error C2660: 'ID3DXSkinMesh::GenerateSkinnedMesh' : function does not take 7 arguments
error C2660: 'ID3DXSkinMesh::UpdateSkinnedMesh' : function does not take 3 arguments

I also get a linking error but I think this is secondary to the above errors.

Does anyone know how to fix these?

Thanks.

Spellbreaker · « **Reply #1 on:** May 17, 2012, 04:54:41 PM »

As far as I know you cannot compile WME with Visual Studio Express, because of the limited functionality. You need the full Visual C++ at least, or am I wrong?

Mnemonic · « **Reply #2 on:** May 17, 2012, 06:14:07 PM »

Spell: I think you're wrong.
binary1: Seems like a mismatch between DirectX version and project settings. WME project comes with two build configurations, one for DX8 and one for DX9. DX8 version of UpdateSkinnedMesh DOES take 3 arguments. The DX9 version doesn't. You seem to be compiling DX8 build of WME against DX9 headers.

Spellbreaker · « **Reply #3 on:** May 17, 2012, 08:21:55 PM »

Was it WME Lite? I dunno. There was something about some SDK that did not compile with the express version...

binary1 · « **Reply #4 on:** May 18, 2012, 03:37:09 AM »

I checked the configuration in VS 2008 but it is set at debug, not debugd3d9. I did try switching to dbugd3d9 but got a lot of errors with that. I tried with the release configuration but got the same two errors that I had with the debug configuration. After that I pulled out an old computer with Visual Studio 2005 (full version) but get the same two errors. I'm going to look up the functions to see if I can figure out what is going on. Anything else I can check? I appreciate the help.

Mnemonic · « **Reply #5 on:** May 18, 2012, 07:23:42 AM »

Check the directory settings in Visual Studio preferences (Projects and Solutions -> VC++ Directories).
Make sure the DX8 include and library directores are earlier in the list than DX9 ones.

binary1 · « **Reply #6 on:** May 18, 2012, 07:05:55 PM »

It seems that SkinMeshHelper.h has the following:

HRESULT GenerateSkinnedMesh(DWORD Options, FLOAT minWeight, CONST LPDWORD pAdjacencyIn, LPDWORD pAdjacencyOut, LPD3DXMESH* ppMesh);
HRESULT UpdateSkinnedMesh(CONST D3DXMATRIX* pBoneTransforms, LPD3DXMESH pMesh);

but there are 7 parameters for GenerateSkinnedMesh and 3 parameters for UpdateSkinnedMesh in SkinMeshHelper.cpp

I'm going to try to edit the header file.

binary1 · « **Reply #7 on:** May 18, 2012, 07:15:22 PM »

Actually when I looked again at SkinnedMeshHelper.cpp, there were extra nulls in the return statements.

For example, GenerateSkinnedMesh had:
return m_SkinMesh->GenerateSkinnedMesh(Options, minWeight, pAdjacencyIn, pAdjacencyOut, NULL, NULL, ppMesh);

When I removed the NULL parameters, the two errors disappeared. I have to locate D3DX8.lib but I think everything should work now.

Thanks!

binary1 · « **Reply #8 on:** May 20, 2012, 01:04:22 AM »

I didn't have d3dx8.lib but finally managed to locate directx 8 online and installed the full version. That changed my original errors into the opposite problem - now the program reported too few parameters for the two functions. So... I restored the original versions.

The program now compiles with a lot of warnings, mostly about vc80.pdb not found usually with a libvorbis file but no errors. However, when I try to run the executable, I get the following error: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail.

I'm going to re-install libvorbis but I'm not sure if this is the problem. Has anyone else seen this error message or knows what to do about it?

Mnemonic · « **Reply #9 on:** May 20, 2012, 07:37:48 AM »

Do you get this error even for the release build?
Also, what do you mean by reinstalling libVorbis? You're not using the libs that come with WME sources?

This error means the executable is referencing external DLL libraries that are not installed on your machine. Typically this is about the Microsoft Visual C++ runtime. However, the Release build of WME shouldn't reference that, only the Debug build does.

Make sure you have the Visual Studio service packs installed.

binary1 · « **Reply #10 on:** May 20, 2012, 07:21:41 PM »

I get the problem with both the release and debug versions. I am using the libs that came with wme but was wondering if I needed to do something else.

I just tried again with VS 2005 with about the same result. Everything compiles but there are a lot of warnings and the program won't run. When I try to run the program (VS 2005), I get: "Some of the essential game files cannot be loaded. Please reinstall the game and try again."

Here are the warnings from VS2005 (release version):

3>Generating code
3>f:\projects\wme\src\external_lib\libtheora\lib\dec\quant.c(117) : warning C4701: potentially uninitialized local variable 'plj' used
3>f:\projects\wme\src\external_lib\libtheora\lib\dec\decode.c(1436) : warning C4701: potentially uninitialized local variable 'last_zzi' used
3>Finished generating code
3>libtheora.lib(bitpack.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(mmxstate.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(state.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(mmxfrag.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(decinfo.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(mmxloopfilter.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(decode1.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(x86state.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(info.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(idct1.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(apiwrapper.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(internal.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(dequant.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(decapiwrapper.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(huffdec.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(fragment.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(quant1.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libtheora.lib(mmxidct.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(adler32.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(compress.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(crc32.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(deflate.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(inffast.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(inflate.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(inftrees.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(trees.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(uncompr.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>zlib.lib(zutil.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(png.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngerror.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngget.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngmem.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngread.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngrio.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngrtran.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngrutil.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngset.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libpng.lib(pngtrans.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jcomapi.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdapimin.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdapistd.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdcoefct.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdcolor.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jddctmgr.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdhuff.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdinput.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdmainct.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdmarker.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdmaster.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdmerge.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdphuff.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdpostct.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jdsample.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jerror.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jidctflt.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jidctfst.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jidctint.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jidctred.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jmemmgr.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jmemnobs.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jquant1.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jquant2.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libjpeg.lib(jutils.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libogg.lib(bitwise.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libogg.lib(framing.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(analysis.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(bitrate.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(block.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(codebook.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(envelope.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(floor0.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(floor1.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(info.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(lpc.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(lsp.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(mapping0.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(mdct.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(psy.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(registry.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(res0.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(sharedbook.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(smallft.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(synthesis.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbis.lib(window.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>libvorbisfile.lib(vorbisfile.obj) : warning LNK4204: 'c:\wme\src\wme\release\vc80.pdb' is missing debugging information for referencing module; linking object as if no debug info
3>Embedding manifest...
3>.\res\manifest.xml : manifest authoring warning 81010002: Unrecognized Element "requestedPrivileges" in namespace "urn:schemas-microsoft-com:asm.v2".

I don't get the manifest warning with 2008 & 2019 but otherwise the warnings look to be about the same. I'm not sure if the problem has anything to do with the warnings or if I have something else wrong.

Thanks.

Mnemonic · « **Reply #11 on:** May 20, 2012, 07:47:38 PM »

These warning are harmless, as far as I can tell. Now you need to point the engine to some project, as described in this post: http://forum.dead-code.org/index.php?topic=3404.msg20932#msg20932

binary1 · « **Reply #12 on:** May 20, 2012, 11:40:17 PM »

I don't completely understand but here is what I think.
I see that wme.exe doesn't really run by itself. When I run a game.wpr, it is coming up in WME Project Manager. If I compile the sources, I need to point to a .wpr file. Is that correct?

I'm looking at what you said in the other post:
"Hm, not really. You need to set the path to your project in Project Settings->Debugging->Command line arguments. Enter something like:

Code: [Select]
-project "path\to\your\project.wpr"

Then just click "Run with debugging". What problem exactly you're having?"

So ... in Visual Studio 2008, I went to Project-Properties-Debugging-command arguments and put in "-project "projects\wme_demo\wme_demo.wpr". $(TargetPath) is under Command. "projects\wme_demo\wme_demo.wpr" is inside the debug directory with wme.exe.

Everything compiles ok but when I try to run the program, it says "Unable to start program "c:\Engines\wme_src_191_2\src\debug\wme.exe" This application has failed to start because the application configuration is incorrect. Review the manifest file for possible errors. Reinstalling the application may fix this problem. For more details, please see the application event log."

Am I on the right track or am I completely misunderstanding what should happen? Do I need to add a game to the project? How should things work without Project Manager?

Thanks again.

Spellbreaker · « **Reply #13 on:** May 21, 2012, 01:21:45 PM »

Hey there.

May I ask why you are compiling WME? Did you make any changes do the Sourcecode, or do you want to make any changes?

binary1 · « **Reply #14 on:** May 22, 2012, 03:35:54 PM »

Quote from: Spellbreaker on May 21, 2012, 01:21:45 PM

Hey there.

May I ask why you are compiling WME? Did you make any changes do the Sourcecode, or do you want to make any changes?

I used WME for a short project that I was doing for a class I was taking. The ability to use 3d models with 2d backgrounds is perfect for what I want to do. I am creating an application for teaching veterinary students but have limited resources and unfortunately, very little (actually zero) artistic talent. So ... the project I did used 3d characters with photographs or screen shots used as backgrounds. I'd like to use motion capture for some close up sequences but am not sure what I can do with WME. I've only just started to learn the engine. The problem is that WME is no longer being developed. I know that WME2 is being developed but I don't know if there is anything that can be used yet. Anyway, the short answer is that I may never make changes but I wanted to make sure that it was possible. Also, I think I can learn how to use the engine better if I can understand and experiment with the code a bit.

I've looked at other engines (C4, TGE, Irrlicht, Ogre3D, and others) but I think Wintermute is the best fit.

So... you know what else I need to do to get WME to run after compiling the code?

Mnemonic · « **Reply #15 on:** May 22, 2012, 05:18:47 PM »

So let me recap. You successfully compiled both Debug and Release versions. If you run the Release version, the engine complains it can't find essential files. For that reason you need to change the settings (as described in the linked thread above) so that the engine knows where your project file is. If you do that, I think you will be able to run the game just fine.

The Debug version is more complicated. You're getting the side by side assembly errors, which basically means there's some DLL mismatch. I think it's caused by the fact, that the provided dependencies (the .lib files) are compiled with Visual Studio 2005, while you are compiling the engine with Visual Studio 2008. So the resulting executable is referencing two different versions of Visual C++ runtime. While Microsoft offers installers for those runtimes, they only provide the Release versions, but in this case we need the debug version, which AFAIK comes only with Visual Studio.

binary1 · « **Reply #16 on:** May 22, 2012, 06:21:54 PM »

I have full versions of Visual Studio 2005 and 2010 and the express version of 2008. I can compile but can't run with all of them. The 2005 version is on an older computer that I have at home so I'll try the method you suggested tonight using 2005. I tried previously with the 2008 version.

Here is what I did (in VS 2008):
I went to Project-Properties-Debugging-command arguments and put in: -project "projects\wme_demo\wme_demo.wpr". $(TargetPath) was already listed under Project-Properties-Debugging-Command.

"projects\wme_demo\wme_demo.wpr" is inside the debug directory with wme.exe.

Is that the correct way to point to a game file? Do I need to have ProjectMan.exe or any other executable in the directory with wme.exe?

Thanks for all your help. WME is perfect for my needs and I appreciate all that you put into it. I'm looking forward to WME2!

Mnemonic · « **Reply #17 on:** May 22, 2012, 07:34:47 PM »

Quote from: binary1 on May 22, 2012, 06:21:54 PM

I went to Project-Properties-Debugging-command arguments and put in: -project "projects\wme_demo\wme_demo.wpr".

Better use an absolute path: -project "c:\some_directory\wme_demo.wpr"
Then it doesn't matter where the project is located and wme will be able to find it.

binary1 · « **Reply #18 on:** May 23, 2012, 06:18:04 AM »

That partly worked. (I am using Visual Studio 2005 with the debug configuration and used the absolute path to the demo project.) I got the settings screen and then a black screen. Frames per second are displaying in the top left. On the right, it displays the mode, the polycount (190), running scripts ("0(r:0 w:0 p:0)"), mouse position (it changes correctly as I move the mouse but the scene value is the same as the mouse value), Scene ("prev:

"), and the timer which continuously recycles. There are no images on the screen.

Do any of the other executable or library files files have to be copied to the directory with wme.exe? I only have wme.exe after building the source files but I see quite a few other files in the development kit with wme.exe. ProjectMan.exe, Integrator.exe, wme_console.dll are a few. Should I be seeing the demo game at this point?

Thanks.

Mnemonic · « **Reply #19 on:** May 23, 2012, 06:48:25 AM »

Quote from: binary1 on May 23, 2012, 06:18:04 AM

Do any of the other executable or library files files have to be copied to the directory with wme.exe?

Oh yes, sorry. dcscomp.dll needs to be copied there. Otherwise the engine isn't able to compile scripts.

binary1 · « **Reply #20 on:** May 24, 2012, 03:44:45 PM »

Success! I have it working with VS 2005 with the dll file added. Thanks!

News:

Author Topic: skinmeshhelper error on compile (Read 26002 times)